Description
Sample pack of our Pine Floor Filling Slivers allows you check if the slivers are suitable for your project. Sample pack consists of two pieces of slivers – one 6mm thick and one 8mm thick together with installation instructions.
GET 5% OFF WHEN YOU BUY A FULL PACK OF SLIVERS – PROMO CODE INCLUDED WITH EVERY SAMPLE PACK
Double check if width and colour of our slivers are suitable for your floor before proceeding with a full size pack! For free friendly advice, call us now on:
Tel: 0800 500 3099
Filling gaps in your old pine floors have never been easier!
- Make sure that gaps are free of any dust or dirt
- Apply wood adhesive on both sides of a sliver
- Insert it in a gap and tap it with a hammer until it sits firmly
- Cut away excess of the sliver
- Sand over filled area for even and smooth finish
Our slivers are made of European larch wood, which actually is a much better match for old pine floorboards than slivers made from new or even reclaimed pine. Larch is also harder than pine, making it much better suited for hammering into gaps between floorboards. Our slivers are also designed specifically for filling floorboard gaps. Their height allows them to penetrate gaps fully without reaching floorboard joists.
Every woodworker knows how important wood moisture content is. We make sure our slivers are dry enough to be suitable for use straight away. New pine slivers, and even ones made of old pine, have too high moisture content which results in shrinkage later on. Such slivers would shrink over time and fall through gaps, defeating the whole point of using wooden gap filling. Larch wood naturally has lower moisture content than pine. Our larch slivers will not shrink with time. They will retain their original shape and size.
Reviews
There are no reviews yet.