Select Page

Transform Your Old Wooden Floors

Are you fed up with your old gappy floorboards? Finally there’s a way to fix it! Use our slivers to fix all gaps in floorboards and make them look like new!

Perfect Draught Excluder

Did you know that sealing gaps between floorboards can stop cold air from underneath the floor from entering your house? Improve thermal efficiency of your house by filling floorboard gaps!

Sustainable Solution

Our slivers are made of 100% wood – the most natural material out there. And they match old wooden floors 

Filling gaps in your old pine floors have never been easier!

  1. Make sure that gaps are free of any dust or dirt
  2. Apply wood adhesive on both sides of a sliver
  3. Insert it in a gap and tap it with a hammer until it sits firmly
  4. Cut away excess of the sliver
  5. Sand over filled area for even and smooth finish

Our slivers are made of European larch wood, which actually is a much better match for old pine floorboards than slivers made from new or even reclaimed pine. Larch is also harder than pine, making it much better suited for hammering into gaps between floorboards. Our slivers are also designed specifically for filling floorboard gaps. Their height allows them to penetrate gaps fully without reaching floorboard joists.

Every woodworker knows how important wood moisture content is. We make sure our slivers are dry enough to be suitable for use straight away. New pine slivers, and even ones made of old pine, have too high moisture content which results in shrinkage later on. Such slivers would shrink over time and fall  through gaps, defeating the whole point of using wooden gap filling. Larch wood naturally has lower moisture content than pine. Our larch slivers will not shrink with time. They will retain their original shape and size.